ошибка при записи

[Anatol]

ДВД резак DVR-111D. Ставлю на запись диск через некоторое время выдает:

Внутреняя ошибка приемника
не могу начать Disk At Once

Ниже лог файл

№№№№№№№№№№№№№№№№№№№№№№№№№№№№№№№№№№№№№№№№№№

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 7.10.1.0
Internal Version: 7, 10, 1, 0

Recorder: <PIONEER DVD-RW DVR-111D>Version: 1.23 - HA 1 TA 0 - 7.10.1.0
Adapter driver: <IDE> HA 1
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <PIONEER DVD-RW DVR-111D>Version: 1.23 - HA 1 TA 0 - 7.10.1.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST340014A IdeChnDr Port 0 ID 0 DMA: On
DiskPeripheral : HDT722520DLAT80 IdeChnDr Port 0 ID 1 DMA: Off
CdRomPeripheral : PIONEER DVD-RW DVR-111D IdeChnDr Port 1 ID 0 DMA: On
DiskPeripheral : Hitachi HDP725050GLA36 GM4O viamraid Port 2 ID 0 DMA: Off
DiskPeripheral : Hitachi HDS721050CLA36 JP2O viamraid Port 2 ID 2 DMA: Off

=== CDRom-Device-Map ===
PIONEER DVD-RW DVR-111D E: CdRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1023MB (1048048kB)
Free physical memory: 560MB (574404kB)
Memory in use : 45 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

17.3.2011
Проект ISO
13:31:08 #1 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

13:31:10 #2 Text 0 File Isodoc.cpp, Line 6666
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

13:31:10 #3 ISO9660GEN -11 File Geniso.cpp, Line 3343
First writeable address = 0 (0x00000000)

13:31:10 #4 Text 0 File Burncd.cpp, Line 3508
Turn on Disc-At-Once, using DVD media

13:31:10 #5 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2159839 (479:57.64, 4218MB)

13:31:10 #6 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)

13:31:10 #7 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: PIONEER DVD-RW DVR-111D, Media type: DVD+RW
Disc Manufacturer ID: INFODISC, Media Type ID: A10, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 1

13:31:10 #8 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================

13:31:10 #9 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2159840 (2159840) = #2159840/479:57.65
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2159840 blocks [E: PIONEER DVD-RW DVR-111D]
--------------------------------------------------------------

13:31:10 #10 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [E: PIONEER DVD-RW DVR-111D] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4423352320, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|__ ____NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2159840 | 0 | 0x00
2159840 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

13:31:10 #11 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

13:31:10 #12 Text 0 File Burncd.cpp, Line 4294
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

13:31:10 #13 Phase 24 File dlgbrnst.cpp, Line 1762
Caching of files started

13:31:11 #14 Text 0 File Burncd.cpp, Line 4413
Cache writing successful.

13:31:11 #15 Phase 25 File dlgbrnst.cpp, Line 1762
Caching of files completed

13:31:11 #16 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 2.4x (3*324 Кб/с)

13:31:11 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

13:31:11 #18 Text 0 File Cdrdrv.cpp, Line 9872
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 1.1x (2)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: INFODISC
Media type ID: A10
Product revision number: 1
Number of Physical format information bytes in use in ADIP up to byte 63: 57
Media Specific [16..63]:
00 00 01 49 4E 46 4F 44 - 49 53 43 41 31 30 01 39 ...INFODISCA10.9
23 00 9C 7C 5C 02 28 00 - 96 7E 70 02 28 00 9C 7B #..|\.(..~p.(..{
68 02 28 04 04 20 E0 00 - F0 00 00 00 00 00 00 00 h.(.............

13:31:11 #19 Phase 98 File dlgbrnst.cpp, Line 1762
Start formatting disc before burning

13:31:18 #20 SPTI -1061 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1061)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x44
Sense Qual: 0xD9
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x71 00 04 00 00 00 00 0E 00 00 00 00 44 D9

13:31:18 #21 Phase 101 File dlgbrnst.cpp, Line 1762
Formatting disc failed

13:31:18 #22 Text 0 File DVDPlusRW.cpp, Line 675
Start write address at LBA 0
DVD high compatibility mode: Yes

13:31:18 #23 CDR -1061 File ThreadedTransferInterface.cpp, Line 1752
Internal target failure
E: PIONEER DVD-RW DVR-111D

13:31:18 #24 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1752
Could not perform start of Disc-at-once

13:31:18 #25 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800

13:31:18 #26 Phase 38 File dlgbrnst.cpp, Line 1762
Burn process failed at 2.4x (3*324 Кб/с)

13:31:18 #27 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

13:31:21 #28 Text 0 File Cdrdrv.cpp, Line 11185
DriveLocker: UnLockVolume completed

13:31:21 #29 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

№№№№№№№№№№№№№№№№№№№№№№№№№№№№№№№№№№№№№№№№№№№

Не пойму это проблема с железом или прошивкой. Аналогичная ошибка и в Алкохоле.
Спасибо

[Бумик]

Как много текста-жуть.
Первое,что приходит в голову - поменять шлейф.
И опять же-резак иде или сата,сидит ли на одном шнурке с хардом или нет?
ПыСы Из лога увидел,что резак ИДЕ.
А почему резак на первом разьеме ,а харды на втором?
Наоборот должно быть....

[Бумик]

Опять же-голова закружилась.
Что ,четыре харда подключено?
И еще резак,у контроллера голова закружилась...

[Dems]

Иногда косяков добавляют некачественные болванки...

[Anatol]

Резак - ИДЕ, харды висят два ИДЕ на отдельном шлейфе (на них совсем другой шлейф), другие два САТАшные - подключены через ПСИай контроллер. Резак висит на втором разъеме.
Пишу на болванки ДВД-РВ Вербайтим.